Image | Reference | Name | Description | EvoDrive+ | EvoDrive+ Baño | e-motion | Video |
---|---|---|---|---|---|---|---|
![]() |
69330004 | Activation and safety sensor (microwave and infrared), OAM-DUAL T | It offers the functions of activation and safety in one device. The microwave radar opens the door when motion is detected, while the infrared sensor holds the door open for safety while detecting the presence of a person on the threshold when the door is in motion. The detection area is wider than the OA203C infrared sensor. | ✅ | ✅ | ✅ |
![]() |
![]() |
69320001 | Activation and safety infrared sensor, OA-203C | Infrared sensor used to detect the presence of people near the door, to activate and open the door, or to keep it open while a person remains standing in its detection area. We recommend its use only for one of the two functions. | ✅ | ✅ | ✅ |
![]() |
![]() |
69360001 | Clear-wave touch-less switch | Microwave radar that detects the movement a hand or foot waving in front of the device. When motion is detected, the door opens, remains open for a programmable hold-open time, and closes. The detection area can be adjusted between 10 and 50 cm. | ✅ | ✅ | ✅ |
![]() |
![]() |
69131010 | Wireless push button (white) | When the device is pressed, the door opens, remains open for a programmable hold-open time, and closes. The device communicates with the main electronics by radio frequency, and requires no wires for installation. It can be easily fixed to a wall, or to the surface of the door leaf | ✅ | ✅ | ❌ |
![]() |
![]() |
69111005 | Remote control with 4 operating modes | Allows selection of the door operating mode between: AUTOMATIC (the door opens and closes after an activation device is triggered, or by push&go); OPEN (the door opens and remains in manual mode); CLOSED (the door closes and remains locked by the optional automatic lock, while the operator is energized); EXIT ONLY (the interior sensors allow door activation to allow people to exit, while the exterior activation devices remain deactivated to prevent entry) | ✅ | ❌ | ✅ |
![]() |
![]() |
69620004 | EvoDrive+ automatic lock, fail-safe | Optional element, integrated inside the operator. It locks the leaf in closed position, while the door is in CLOSED or EXIT ONLY modes. It is an fail-safe lock: in case of power failure, the lock is released to allow manual opening of the door. | ✅ | ✅ | ❌ | |
![]() |
69620001 | e-motion automatic lock, fail-safe | Optional element, integrated inside the operator. It locks the leaf in closed position, while the door is in CLOSED or EXIT ONLY modes. It is an fail-safe lock: in case of power failure, the lock is released to allow manual opening of the door. | ❌ | ❌ | ✅ | |
![]() |
69150001 | BASIC toilet mode kit: 2 touch-less switches and I/O interface | Set of 2 proximity sensors and I/O interface to allow the door to be used in "toilet mode". The external sensor activates and unlocks the door; the internal sensor locks the door when closed, and unlocks/opens the door for exiting | ❌ | ✅ | ❌ | |
![]() |
69150002 | COMFORT toilet mode kit: 3 touch-less switches, light indicator and I/O interface | Set of 3 proximity sensors and I/O interface to allow the door to be used in "toilet mode". The external sensor activates and opens the door; an internal sensor locks/unlocks the door; the second sensor activates the door to open and exit. A led light system indicates on the outside whether the bathroom is occupied (red light on) or free (green light on). | ❌ | ✅ | ❌ | |
![]() |
69600001 | Emergency Key Switch, for toilet mode | On doors in "toilet mode", it allows unlocking and opening the door from the outside, in case of emergency, by the maintenance and/or security personnel. | ❌ | ✅ | ❌ |
Accessories
Devices and Leaves for Automatic Doors
Our EvoDrive+ and e-motion automatic doors can be as sophisticated or simple as you desire. Here you will find a list of the most common accessories. Contact us if you have any special requirement, and we will find a solution
Activation and Safety Devices
Types of Door Leaves
Image | Reference | Name | Description | EvoDrive+ | EvoDrive+ Toilet | e-motion |
---|---|---|---|---|---|---|
![]() |
67630001 | TIMBER leaf adaptor for 40 mm wooden leaf | It consists of a 39 mm wide aluminum profile, to be screwed onto a 35-40 mm timber leaf. Floor guide not included (to be supplied by the carpenter) | ✅ | ✅ | ❌ Consult ECLISSE catalogue for options available |
![]() |
67640001 | ALUMINIUM leaf adaptor for 45 mm frame | It consists of a 39 mm wide aluminum profile and a 44 mm wide aluminium rail to be screwed onto a 40-44 mm aluminum leaf. Floor guide not included | ✅ | ✅ | ❌ Consult ECLISSE catalogue for options available |
![]() |
67622000 | TOP RAIL leaf adaptor for 8-10 mm glass, with floor guide | The 8 -10 mm glass fits into the top aluminium rail with sylicone. Floor guide included. | ✅ | ✅ | ❌ Consult ECLISSE catalogue for options available |
![]() |
67625002 | FULL GLASS leaf adaptor for 8-12 mm glass, with floor guide | The 10-12 mm tempered and laminated glass fits into special trolleys, which slide concealed inside the operator. Only the glass remains visible sliding under the drive unit. The glass requires a special cut-off and machining. Floor guide included. | ✅ | ✅ | ❌ Consult ECLISSE catalogue for options available |
![]() |
67625003 | TWINS leaf adaptor for 8-12 mm glass, with floor guide | Stylish and elegant fittings for 8-12 mm tempered and laminated glass. It is necessary to machine the glass with 4 holes x diam. 16 mm on each leaf. | ✅ | ✅ | ❌ Consult ECLISSE catalogue for options available |
![]() |
67625004 | SV-EASY leaf adaptor. Clamps for 8 mm glass, with cover | Ideal solution for 8 mm glass laves, consisting of 2 clamps that hold the glass by pressure. A 40 mm high aluminum cover conceals the clamps and the top edge of the door leaf from end to end. The glass (laminated or tempered and laminated) does not require machining, making it easy to replace in case it breaks. | ✅ | ✅ | ❌ Consult ECLISSE catalogue for options available |
![]() |
67625005 | SV-EASY leaf adaptor. Clamps for 10 mm glass, with cover | Ideal solution for 10 mm glass laves, consisting of 2 clamps that hold the glass by pressure. A 40 mm high aluminum cover conceals the clamps and the top edge of the glass from end to end. The glass (laminated, or tempered and laminated) does not require machining, making it easy to replace in case it breaks. | ✅ | ✅ | ❌ Consult ECLISSE catalogue for options available |