EvoDrive

Automatic sliding door operator for interiors

The EvoDrive is a compact and elegant automatic door operator specifically designed for internal sliding doors commonly used in hotels, offices, private homes, care homes, hospitals and other types of buildings.

Powered by the innovative magnetic linear motor technology developed by MOTION4, it measures only 60 mm high x 65 mm deep, combining the size of a manual sliding door track with the functions and performance of a traditional automatic door operator.

Thanks to its smart design, all the internal elements are easily accessible by simply pulling the front cover down, to ease maintenance. It incorporates wireless Bluetooth technology to communicate the main board with the motor, to avoid the use of cables, wires and other mechanical elements for a simple installation and reliable performance.

Main technical features

Compact aluminium housing: only 60×65 mm

Minimum clear opening: 700 mm. Track length: 1450 mm

Maximum clear opening: 1400mm Guide length: 2850 mm

Leaf weight up to 80Kg

Adjustable opening speed: 200 to 800 mm/s

Acceleration and braking curves: 200 to 800 mm/s2

Low operating noise: <50 dB

Power supply: 230 AC 50-60 Hz (110 V on demand)

Power consumption:
– In operation: 80 W
– Peaks (0,2 sec): 150 W
– Stand-by: 5 w

Motor Specifications

Electric three phase AC motor type LSMPM – Linear Synchronous Motor with Permanent Magnets

Tension: 24V DC (standard)

Peak current: 5A

Operating current: 3A

Motor driver:
– Magnetic position feedback with 3 hall cells.
– Motion control by means of a driver with field oriented control (FOC)
– Wireless communication via Bluetooth

Electronic Specifications

Operated by Microcontroller (MCU)

Wireless communication via Bluetooth

4 operating modes:
– Automatic
– Open
– Close or Close/Lock (with optional auto lock)
– Exit Only / Access control

Adjustable parameters:
– Push & go
– Opening direction: right or left
– “Low energy” or normal mode
– Opening speed
– Closing force
– Obstruction sensitivity
– Hold-open time

Conform to European norms and directives in force:
– Directive 2006/42/EC on Machinery
– Directive 2004/108/EC on “Electromagnetic Compatibility (EMC)”
– Directive 2004/95/EC on “Safety of low voltaje electrical appliances”
– Norm EN16005: “Power operated pedestrian doorsets – Safety in use”

Take a look inside the operator

Move the vertical slider below 

Options and Accessories

 Leaf adaptors

null

Top Clamps

For 8 – 12 mm Tempered Glass
null

Twins

For 8 – 12 mm Tempered Glass
null

Full Glass

For 8 – 12 mm Tempered Glass
null

Timber leaf adaptor

For 30 to 50 mm Timber Leaves
null

Aluminium leaf adaptor

For 40 mm Aluminium Frames

 Activation and Safety Devices

null

Remote Control

Handheld device used to select the operating mode: Automatic, Open, Closed and Exit Only.  In “Closed” and “Exit only” mode an optional automatic lock is required.
null

Push button

Wired or Wireless options. Forget about cables using the wireless push button
null

Touch-less Switch

Activates the door by simply approaching your hand or foot to the sensor (adjustable between 10 and 50 cm)
null

Active Infrared sensor

Can be used for Activation only, Safety only, or a combination of both. Detects presence of persons near the door
null

Automatic Lock

Keeps the door blocked when the leaf is closed position and “Closed” or “Exit Only” modes are selected. In event of power failure, the lock will release to allow manual opening.

Why using the EvoDrive

  • Super compact size

    Measures only 60 mm high x 65 mm deep. It combines the size of a manual door track and the functions of an automatic door

  • Specifically designed for interiors

    Elegant and discreet looking thanks to its compact size

  • Smooth and silent

    No belts. No pulleys. No reduction gears. The door moves in absolute silence.

  • Quick installation

    Installation is fast and easy.  The operator can be eventually cut to size and the opening direction reversed if necessary. 

  • Minimum maintenance

    Almost no maintenance is needed to keep the operator smoothly moving for many years

MOTION4_EvoDrive