Automatic pocket door with the operator concealed inside the counter frame

- Select this item if you are planning to connect an Access control system or use the door as an access to a public or private toilet room.
- This is a FAIL-SAFE automatic lock. In the event of power failure, the lock will be released to allow manual opening. Do not use as a security device!

Automatic lock

SKU: 69620004

• Select the number of units and click on the box to select that accessory.
• Make sure the selection tick mark shows on the top right corner of the box selected

Wireless push button (white)

SKU: 69131010

Automatic pocket door with the operator concealed inside the counter frame quantity

ClearWave touch-less sensor

SKU: 69360001

Automatic pocket door with the operator concealed inside the counter frame quantity

CleanSwitch touch-less sensor, White cover, no logo

Automatic pocket door with the operator concealed inside the counter frame quantity

CleanSwitch touch-less sensor, Black cover, no logo

Automatic pocket door with the operator concealed inside the counter frame quantity

OA FLEX-T Infrared activation & safety sensor

SKU: 69330007

Automatic pocket door with the operator concealed inside the counter frame quantity

OPERATING PRINCIPLES:

1. To enter the bathroom, wave hand on the exterior ClearWave sensor to open the door, then walk in and the door will automatically close.
2. The OAM DUAL-T radar will lock and block the door when the door comes to fully closed position and it de-tects movement inside the bathroom. If it doesn't lock automatically, wave hand on the interior ClearWave sensor to lock the door.
3. When the door locks, the external led indicator (optional) will turn red (toilet occupied)
4. To exit the bathroom, wave hand on the interior ClearWave sensor, to unlock and open the door, walk out, and the door will slide back to closed position
5.  The external led indicator (optional) will turn green until the bathroom

• AUTO LOCK: if someone enters the toilet but “forgets” to wave hand on the interior Clearwave touch-less sensor to lock the door, the DUAL-T radar will automatically lock the door when 1) the door is fully closed and 2) the microwave radar detects movement inside the toilet. This is to make sure the door will be locked when someone goes in but forgets to lock the door.
• VANDAL PROOF: the door will only lock if the radar detects movement of a person inside the toilet. This is to avoid someone to wave hand on the interior Clearwave sensor and run out of the toilet, leaving the door behind locked with no one inside.
• EMERGENCY OPENING: if security staff needs to enter the toilet for whatever reason (person inside the toilet has a heart attack, falls down, faints,…), the door can be opened from the outside by waving the hand on the exterior Clearwave touch-less sensor, continuously during 30 seconds.

• Add a second unit if you need an LED indicator INSIDE the toilet
• Remove the selected unit if you don't need any at all.

ClearWave touch-less sensor

ClearWave touch-less sensor

OA FLEX-T Infrared activation & safety sensor

EvoDrive+ I/O terminal block

External LED strip for toilet door indicator (red/green)

External LED strip for toilet door indicator (red/green)

OPERATING PRINCIPLES:

1. To enter the bathroom, wave hand on the exterior Cleanswitch sensor to open the door, then walk in and the door will automatically close.
2. The OAM DUAL-T radar will lock and block the door when the door comes to fully closed position and it de-tects movement inside the bathroom. If it doesn't lock automatically, wave hand on the interior Cleanswitch sensor to lock the door.
3. When the door locks, the external led indicator (optional) will turn red (toilet occupied)
4. To exit the bathroom, wave hand on the interior Cleanswitch sensor, to unlock and open the door, walk out, and the door will slide back to closed position
5.  The external led indicator (optional) will turn green until the bathroom

• AUTO LOCK: if someone enters the toilet but “forgets” to wave hand on the interior Cleanswitch touch-less sensor to lock the door, the DUAL-T radar will automatically lock the door when 1) the door is fully closed and 2) the microwave radar detects movement inside the toilet. This is to make sure the door will be locked when someone goes in but forgets to lock the door.
• VANDAL PROOF: the door will only lock if the radar detects movement of a person inside the toilet. This is to avoid someone to wave hand on the interior Clearwave sensor and run out of the toilet, leaving the door behind locked with no one inside.
• EMERGENCY OPENING: if security staff needs to enter the toilet for whatever reason (person inside the toilet has a heart attack, falls down, faints,…), the door can be opened from the outside by waving the hand on the exterior Cleanswitch touch-less sensor, continuously during 30 seconds.

• Add a second unit if you need an LED indicator INSIDE the toilet
• Remove the selected unit if you don't need any at all.

CleanSwitch touch-less sensor, White cover, no logo

CleanSwitch touch-less sensor, White cover, no logo

OA FLEX-T Infrared activation & safety sensor

EvoDrive+ I/O terminal block

External LED strip for toilet door indicator (red/green)

External LED strip for toilet door indicator (red/green)

OPERATING PRINCIPLES:

1. To enter the bathroom, wave hand on the exterior Cleanswitch sensor to open the door, then walk in and the door will automatically close.
2. The OAM DUAL-T radar will lock and block the door when the door comes to fully closed position and it de-tects movement inside the bathroom. If it doesn't lock automatically, wave hand on the interior Cleanswitch sensor to lock the door.
3. When the door locks, the external led indicator (optional) will turn red (toilet occupied)
4. To exit the bathroom, wave hand on the interior Cleanswitch sensor, to unlock and open the door, walk out, and the door will slide back to closed position
5.  The external led indicator (optional) will turn green until the bathroom

• AUTO LOCK: if someone enters the toilet but “forgets” to wave hand on the interior Cleanswitch touch-less sensor to lock the door, the DUAL-T radar will automatically lock the door when 1) the door is fully closed and 2) the microwave radar detects movement inside the toilet. This is to make sure the door will be locked when someone goes in but forgets to lock the door.
• VANDAL PROOF: the door will only lock if the radar detects movement of a person inside the toilet. This is to avoid someone to wave hand on the interior Clearwave sensor and run out of the toilet, leaving the door behind locked with no one inside.
• EMERGENCY OPENING: if security staff needs to enter the toilet for whatever reason (person inside the toilet has a heart attack, falls down, faints,…), the door can be opened from the outside by waving the hand on the exterior Cleanswitch touch-less sensor, continuously during 30 seconds.

• Add a second unit if you need an LED indicator INSIDE the toilet
• Remove the selected unit if you don't need any at all.

CleanSwitch touch-less sensor, Black cover, no logo

CleanSwitch touch-less sensor, Black cover, no logo

OA FLEX-T Infrared activation & safety sensor

EvoDrive+ I/O terminal block

External LED strip for toilet door indicator (red/green)

External LED strip for toilet door indicator (red/green)

In AUTOMATIC mode, the door will open and and close on every activation, after a pre-programmed hold-open time (0 to 10 sec).

OPERATING PRINCIPLES:

1. To enter the toilet, wave hand on the exterior activation sensor (if green) to open the door, then walk-in and the door will automatically close.
2. To lock the door from inside, wait until the door is fully closed and wave hand on the interior lock/unlock sensor. All sensors turn red.
3. To unlock and exit the toilet, wave hand on the interior lock/unlock sensor (if red) to unlock and enable other sensors. All sensors turn green.
4. Wave hand on the interior activation sensor to open the door, then walk-out, and the door will automatically close

CleanSwitch LK touch-less sensor, Black cover, Open2 logo

CleanSwitch LK touch-less sensor, Black cover, Open2 logo

CleanSwitch touch-less sensor, Black cover, Lock logo

OA FLEX-T Infrared activation & safety sensor

In BI-STABLE mode, the door will open and stay open on first activation. And close and stay closed on a second activation.

OPERATING PRINCIPLES:

1. To enter the toilet, wave hand on the exterior activation sensor (if green) to open the door and walk-in.
2. Once inside, wave hand on the interior activation sensor to close the door.
3. To lock the door from inside, wait until the door is fully closed and wave hand on the interior lock/unlock sensor. All sensors turn red.
4. To unlock and exit the toilet, wave hand on the interior lock/unlock sensor (if red) to unlock and enable other sensors. All sensors turn green.
5. Wave hand on the interior activation sensor to open the door, then walk-out.
6. The door will stay open until someone activates any of the activation sensors from inside, or outside.

CleanSwitch Std touch-less sensor, Black cover, Open2 logo

CleanSwitch Std touch-less sensor, Black cover, Open2 logo

CleanSwitch touch-less sensor, Black cover, Lock logo

OA FLEX-T Infrared activation & safety sensor