1. Select the opening direction *

Tell us in which direction does the door slide to open position, looking at the door from the same side operator.

LEFT opening (door opens from right to left)

The opening is on the right

RIGHT opening (door opens from left to right)

The opening is on the left

BI-PART (double leaf)

The opening is at the centre, with two leaves opening in opposite directions

2. Door Reference and Dimensions

Your Door ID or ref:

If you have a reference (name, number, ID, location) for this door, please type it here:

Your Door ID or ref:

If you have a reference (name, number, ID, location) for this door, please type it here:

Your Door ID or ref:

If you have a reference (name, number, ID, location) for this door, please type it here:

Opening Height x Width

Compulsory

OH *

Opening Height

OW (min. 750 mm - max. 2850 mm) *

Opening Width

Opening Height x Width

Compulsory

OH *

Opening Height

OW (min. 1500 mm - max. 5700 mm) *

Opening Width

Other dimensions

Fill in as much information as possible, in mm

DL

Total length of the operator = min. 2 x Opening Width (OW) + 50 mm + Operator extensions (A1 + A2)

SW

Total width of the sliding leaf, including overlaps (D1/D2)

D1

Overlap of the door leaf with the wall on the closing side (type "0" if the door closes against a perpendicular wall)

D2

Overlap of the door leaf with the wall on the opening side

A1

Operator extension on the closing side: the edge of the operator and the door leaf are aligned when the door is closed. Indicate here if you need an extension

A2

Operator extension on the opening side: total length of the operator is min. 2 x OW + 50 mm. Indicate here if you need an extension on the opening side of the operator.

Other dimensions

Fill in as much information as possible, in mm

DL

Total length of the operator = min. 2 x Opening Width (OW) + 100 mm + Operator extensions (A1 + A1)

SWL/SWR

Total width of the sliding leaf, including overlaps (D2 Left/Right)

D2 left / D2 right

Overlap of the door leaf with the wall on both sides of the opening

A1 left / A1 right

Operator extension on the two ends of the operator

3. The Operator: Finish option and color of the aluminium header frame *

Silver anodized

SKU: 69710002

Powder coated to WHITE RAL9010

SKU: 69729010

Powder coated to BLACK RAL9005

SKU: 69729005

Powder coated to SPECIAL RAL color

SKU: 69720001

Specify RAL color *

Automatic lock (optional)

- Select this item if you are planning to connect an Access control system or use the door as an access to a public or private toilet room.
- This is a FAIL-SAFE automatic lock. In the event of power failure, the lock will be released to allow manual opening. Do not use as a security device!

Automatic lock

SKU: 69620004

4. Door leaf *

You MUST choose one of the options below. If you will supply the door panel and only need the leaf adaptor, select any of the products available under the category "Automatic door operators".
By selecting this configurator, we will supply the complete door, including the door leaves.
Clear Opening Width (CW) range :
- Timber leaf adaptor; TWINS leaf adaptor; SV-EASY leaf adaptor: 750 - 1200/1400 mm
- Full Glass leaf adaptor: 875- 1200/1400 mm

Timber leaf

Full Glass leaf

TWINS glass leaf

SV-EASY glass leaf with clamps and top rail

Aluminium framed leaf

Describe the type of door panel

Examples:
- Glass door: glass thickness, type of glass (transparent, translucent, colored,...), etc.
- Timber door: type of wood, color, panel thickness (30-45 mm max), etc.
- Aluminium door: type of frame, color, etc.

5. Add Activation and Safety Devices

Describe the Application *

Standard application

Access to a Private toilet (home, hotel room,...)

Access to a Public toilet (public area like restaurants, airports, shopping malls,...)

Select the model and color of the touch-less sensor *

Clearwave - White cover

CleanSwitch - White cover

CleanSwitch - Black cover

Select the operating method *

BI-STABLE: the door will open and stay open on first activation. And close and stay closed on a second activation

AUTOMATIC: the door will open and and close on every activation, after a pre-programmed hold-open time (0 to 10 sec).

Activation and Safety Devices for Standard Applications (optional)

Select the number of units and click on the box to select that accessory.
Make sure the selection tick mark shows on the top right corner of the box selected

Wireless push button (white)

SKU: 69131010

ClearWave touch-less sensor

SKU: 69360001

CleanSwitch touch-less sensor, White cover, no logo

CleanSwitch touch-less sensor, Black cover, no logo

OA FLEX-T Infrared activation & safety sensor

SKU: 69330007

Clearwave for Public Toilet door with optional external LED indicator

OPERATING PRINCIPLES:

To enter the bathroom, wave hand on the exterior ClearWave sensor to open the door, then walk in and the door will automatically close.
The OAM DUAL-T radar will lock and block the door when the door comes to fully closed position and it de-tects movement inside the bathroom. If it doesn't lock automatically, wave hand on the interior ClearWave sensor to lock the door.
When the door locks, the external led indicator (optional) will turn red (toilet occupied)
To exit the bathroom, wave hand on the interior ClearWave sensor, to unlock and open the door, walk out, and the door will slide back to closed position
The external led indicator (optional) will turn green until the bathroom

HIGHLIGHTS:

AUTO LOCK: if someone enters the toilet but “forgets” to wave hand on the interior Clearwave touch-less sensor to lock the door, the DUAL-T radar will automatically lock the door when 1) the door is fully closed and 2) the microwave radar detects movement inside the toilet. This is to make sure the door will be locked when someone goes in but forgets to lock the door.
VANDAL PROOF: the door will only lock if the radar detects movement of a person inside the toilet. This is to avoid someone to wave hand on the interior Clearwave sensor and run out of the toilet, leaving the door behind locked with no one inside.
EMERGENCY OPENING: if security staff needs to enter the toilet for whatever reason (person inside the toilet has a heart attack, falls down, faints,…), the door can be opened from the outside by waving the hand on the exterior Clearwave touch-less sensor, continuously during 30 seconds.

1 pc External LED indicator has been selected as the standard solution, to display the status of the door (free/occupied) OUTSIDE the toilet:

Add a second unit if you need an LED indicator INSIDE the toilet
Remove the selected unit if you don't need any at all.

ClearWave touch-less sensor

ClearWave touch-less sensor

OA FLEX-T Infrared activation & safety sensor

EvoDrive+ I/O terminal block

External LED strip for toilet door indicator (red/green)

External LED strip for toilet door indicator (red/green)

Cleanswitch (White) for Public Toilet door with optional external LED indicator

OPERATING PRINCIPLES:

To enter the bathroom, wave hand on the exterior Cleanswitch sensor to open the door, then walk in and the door will automatically close.
The OAM DUAL-T radar will lock and block the door when the door comes to fully closed position and it de-tects movement inside the bathroom. If it doesn't lock automatically, wave hand on the interior Cleanswitch sensor to lock the door.
When the door locks, the external led indicator (optional) will turn red (toilet occupied)
To exit the bathroom, wave hand on the interior Cleanswitch sensor, to unlock and open the door, walk out, and the door will slide back to closed position
The external led indicator (optional) will turn green until the bathroom

HIGHLIGHTS:

AUTO LOCK: if someone enters the toilet but “forgets” to wave hand on the interior Cleanswitch touch-less sensor to lock the door, the DUAL-T radar will automatically lock the door when 1) the door is fully closed and 2) the microwave radar detects movement inside the toilet. This is to make sure the door will be locked when someone goes in but forgets to lock the door.
VANDAL PROOF: the door will only lock if the radar detects movement of a person inside the toilet. This is to avoid someone to wave hand on the interior Clearwave sensor and run out of the toilet, leaving the door behind locked with no one inside.
EMERGENCY OPENING: if security staff needs to enter the toilet for whatever reason (person inside the toilet has a heart attack, falls down, faints,…), the door can be opened from the outside by waving the hand on the exterior Cleanswitch touch-less sensor, continuously during 30 seconds.

1 pc External LED indicator has been selected as the standard solution, to display the status of the door (free/occupied) OUTSIDE the toilet:

Add a second unit if you need an LED indicator INSIDE the toilet
Remove the selected unit if you don't need any at all.

CleanSwitch touch-less sensor, White cover, no logo

CleanSwitch touch-less sensor, White cover, no logo

OA FLEX-T Infrared activation & safety sensor

EvoDrive+ I/O terminal block

External LED strip for toilet door indicator (red/green)

External LED strip for toilet door indicator (red/green)

Cleanswitch (Black) for Public Toilet door with optional external LED indicator

OPERATING PRINCIPLES:

To enter the bathroom, wave hand on the exterior Cleanswitch sensor to open the door, then walk in and the door will automatically close.
The OAM DUAL-T radar will lock and block the door when the door comes to fully closed position and it de-tects movement inside the bathroom. If it doesn't lock automatically, wave hand on the interior Cleanswitch sensor to lock the door.
When the door locks, the external led indicator (optional) will turn red (toilet occupied)
To exit the bathroom, wave hand on the interior Cleanswitch sensor, to unlock and open the door, walk out, and the door will slide back to closed position
The external led indicator (optional) will turn green until the bathroom

HIGHLIGHTS:

AUTO LOCK: if someone enters the toilet but “forgets” to wave hand on the interior Cleanswitch touch-less sensor to lock the door, the DUAL-T radar will automatically lock the door when 1) the door is fully closed and 2) the microwave radar detects movement inside the toilet. This is to make sure the door will be locked when someone goes in but forgets to lock the door.
VANDAL PROOF: the door will only lock if the radar detects movement of a person inside the toilet. This is to avoid someone to wave hand on the interior Clearwave sensor and run out of the toilet, leaving the door behind locked with no one inside.
EMERGENCY OPENING: if security staff needs to enter the toilet for whatever reason (person inside the toilet has a heart attack, falls down, faints,…), the door can be opened from the outside by waving the hand on the exterior Cleanswitch touch-less sensor, continuously during 30 seconds.

1 pc External LED indicator has been selected as the standard solution, to display the status of the door (free/occupied) OUTSIDE the toilet:

Add a second unit if you need an LED indicator INSIDE the toilet
Remove the selected unit if you don't need any at all.

CleanSwitch touch-less sensor, Black cover, no logo

CleanSwitch touch-less sensor, Black cover, no logo

OA FLEX-T Infrared activation & safety sensor

EvoDrive+ I/O terminal block

External LED strip for toilet door indicator (red/green)

External LED strip for toilet door indicator (red/green)

Cleanswitch for Toilet door in AUTOMATIC mode

In AUTOMATIC mode, the door will open and and close on every activation, after a pre-programmed hold-open time (0 to 10 sec).

OPERATING PRINCIPLES:

To enter the toilet, wave hand on the exterior activation sensor (if green) to open the door, then walk-in and the door will automatically close.
To lock the door from inside, wait until the door is fully closed and wave hand on the interior lock/unlock sensor. All sensors turn red.
To unlock and exit the toilet, wave hand on the interior lock/unlock sensor (if red) to unlock and enable other sensors. All sensors turn green.
Wave hand on the interior activation sensor to open the door, then walk-out, and the door will automatically close

THE OAM DUAL-T SAFETY SENSOR IS COMPULSORY

CleanSwitch LK touch-less sensor, Black cover, Open2 logo

CleanSwitch touch-less sensor, Black cover, Lock logo

OA FLEX-T Infrared activation & safety sensor

Cleanswitch for Toilet door in BI-STABLE mode

In BI-STABLE mode, the door will open and stay open on first activation. And close and stay closed on a second activation.

OPERATING PRINCIPLES:

To enter the toilet, wave hand on the exterior activation sensor (if green) to open the door and walk-in.
Once inside, wave hand on the interior activation sensor to close the door.
To lock the door from inside, wait until the door is fully closed and wave hand on the interior lock/unlock sensor. All sensors turn red.
To unlock and exit the toilet, wave hand on the interior lock/unlock sensor (if red) to unlock and enable other sensors. All sensors turn green.
Wave hand on the interior activation sensor to open the door, then walk-out.
The door will stay open until someone activates any of the activation sensors from inside, or outside.

THE OAM DUAL-T SAFETY SENSOR IS OPTIONAL. SELECT THE OPTION IF REQUIRED

CleanSwitch LK touch-less sensor, Black cover, Open2 logo

CleanSwitch touch-less sensor, Black cover, Lock logo

OA FLEX-T Infrared activation & safety sensor

6. Add structural elements (if needed)

Machined al. profile (70x70 mm) for ceiling mounting

SKU: 67203245

Glass mount fixtures and back aluminium cover

SKU: 67203004

7. Installation *

I am a qualified technician, and will do the installation myself

I already have a qualified installer/contractor to do it

I want MOTION4 to quote the installation cost for me. Please quote.

Location of the installation

To quote the installation cost, please introduce the address, postal code or city of the installation

Automatic sliding door with the operator visible above the opening

1. Select the opening direction *

2. Door Reference and Dimensions

Your Door ID or ref:

Your Door ID or ref:

Your Door ID or ref:

Opening Height x Width

Opening Height x Width

Other dimensions

Other dimensions

3. The Operator: Finish option and color of the aluminium header frame *

Automatic lock (optional)

4. Door leaf *

Describe the type of door panel

5. Add Activation and Safety Devices

Describe the Application *

Select the model and color of the touch-less sensor *

Select the operating method *

Activation and Safety Devices for Standard Applications (optional)

Clearwave for Public Toilet door with optional external LED indicator

Cleanswitch (White) for Public Toilet door with optional external LED indicator

Cleanswitch (Black) for Public Toilet door with optional external LED indicator

Cleanswitch for Toilet door in AUTOMATIC mode

Cleanswitch for Toilet door in BI-STABLE mode

6. Add structural elements (if needed)

7. Installation *

Location of the installation

Tell us more about this door

Main Menu:

Follow us on Social Media:

Total options:
Order total:

Automatic sliding door with the operator visible above the opening

1. Select the opening direction *

2. Door Reference and Dimensions

Your Door ID or ref:

Your Door ID or ref:

Your Door ID or ref:

Opening Height x Width

Opening Height x Width

Other dimensions

Other dimensions

3. The Operator: Finish option and color of the aluminium header frame *

Automatic lock (optional)

4. Door leaf *

Describe the type of door panel

5. Add Activation and Safety Devices

Describe the Application *

Select the model and color of the touch-less sensor *

Select the operating method *

Activation and Safety Devices for Standard Applications (optional)

Clearwave for Public Toilet door with optional external LED indicator

Cleanswitch (White) for Public Toilet door with optional external LED indicator

Cleanswitch (Black) for Public Toilet door with optional external LED indicator

Cleanswitch for Toilet door in AUTOMATIC mode

Cleanswitch for Toilet door in BI-STABLE mode

6. Add structural elements (if needed)

7. Installation *

Location of the installation

Tell us more about this door

Related products

Automatic pocket door with the operator concealed inside the counter frame

Main Menu:

Follow us on Social Media: